Winland WBTX-345 Wireless Water Sensor With Probe For Honeywell & 2GIG

Winland WBTX-345 Wireless Water Sensor with Probe for Honeywell & 2GIG

Water condensation and high humidity can cause false alarms which can become a burden over time. The water sensor from Winland Electronics is designed to prevent false alarms by using a remote probe that can be placed in places where a leak is most likely to occur making it ideal for homes, offices, computer rooms, warehouses and so on.

A 6FT cable connects the transmitter and the probe so you can mount the transmitter on a wall using mounting screws or the adhesive strips provided. The contacts on the probe are located above floor level to help further prevent false alarms created by condensation.

The WBTX-345 is specifically meant to work with Honeywell, 2GIG and other RF 345 systems.

Note: This model doesnFTt work as a standalone unit and needs to be hooked up to an alarm system.

Winland WBTX-345 Wireless Water Sensor with Probe Specifications

• Wireless signal range of 600FT (200M)
• Transmitter frequency of 345 MHz
• Battery life of approximately 5 years
• Operating temperature: 32° to 122°F (0° to 50°C)
• Probe Dimensions: .7 x 1.77 x .38
• Transmitter Dimensions: 2.71 x .95 x .56
• 1-year warranty

Winland WBTX-345 Wireless Water Sensor with Probe Includes

• 1 x Transmitter (includes batteries)
• 1 x Surface Probe
• 1 x Quick Start Guide
• 2 x Mounting Screws
• 2 x Adhesive Strips

Winland WBTX-345 Wireless Water Sensor with Probe Support

• WBTX- Instructions